IPS Ionogram Viewer = Java after V7 Update 51

Post Reply
VK4AMG
Forum Novice
Posts: 5
Joined: Sat Jan 13, 2007 2:03 pm
Location: Albany Creek Q

IPS Ionogram Viewer = Java after V7 Update 51

Post by VK4AMG » Sun Jan 26, 2014 2:52 pm

After Mid Jan14 (Java Version 7 Update 51) The Ionogram Viewer application of the Australian IPS will not run unless the site is added to an exception list in Java Configuration/Security.
Java V7 B51.jpg
Java Version Jan14
Java V7 B51.jpg (7.6 KiB) Viewed 743 times
To add "www.ips.gov.au/HF_Systems/1/3\... to the "Exception Site List", open Java Control Panel: Start/All Programs/Java/ConfigureJava".
Add Exception.jpg
Add Exception
Then select the "Security" tab. Press "Edit Site List".
Config Java.jpg
Configure Java
Cut and past or type "www.ips.gov.au/HF_Systems/1/3\... in the "Location" box. Press "Add" then "OK".

Click "OK" to close the configuration window.

Now re-open IPS Ionogram viewer page "http://www.ips.gov.au/HF_Systems/1/3".

JAVA will prompt for permission to run. Acknowledge the risk and run.

All should now be OK.

Some have had problems with cut and paste of the URL name into the add box. Typing although tedious appears to overcome this problem.

User avatar
VK6ZFG
Frequent Poster
Posts: 188
Joined: Mon Mar 15, 2010 12:18 am

Re: IPS Ionogram Viewer = Java after V7 Update 51

Post by VK6ZFG » Sun Jan 26, 2014 3:49 pm

Thanks George,

It now runs.

I had to add in "http://www.ips.gov.au/HF_Systems/1/3" for it to work.
73s
Igor
VK6ZFG

VK3ZYC
Forum Novice
Posts: 38
Joined: Sat Apr 02, 2005 9:14 pm
Location: Longford Vic.

Re: IPS Ionogram Viewer = Java after V7 Update 51

Post by VK3ZYC » Sun Jan 26, 2014 3:55 pm

i used "http://ips.gov.au" this worked for me

jim VK3ZYC

VK4MIL
Frequent Poster
Posts: 64
Joined: Fri Feb 04, 2011 2:50 pm

Re: IPS Ionogram Viewer = Java after V7 Update 51

Post by VK4MIL » Sun Jan 26, 2014 4:16 pm

Thanks George very helpful cheque in the post

Cheers VK4MIL

Post Reply