WSJT9.3

WSJT 65 (and variants) Discussion

WSJT9.3

Postby VK2FAK » Thu Sep 25, 2014 7:53 pm

Hi all....

Just a quick question on the operation of this software....I have been running it on JT65 and notice it does not decode 2 stations operating at the same time......so how does it determine which one it will show in the decoded window ?

John
Regards

John Vk2FAK
VK2FAK
Forum Diehard
 
Posts: 919
Joined: Thu Apr 15, 2010 6:28 pm

Re: WSJT9.3

Postby ZL1RS » Fri Sep 26, 2014 6:10 am

Hi John,

1) click to check the "Freeze" box
2) narrow down the "Tol" (right click in that box to make it narrower, left click makes it wider)
3) on the SpecJT screen click on the 'sync line' of the station of interest to center the green
4) finally click "Decode".

jt65.jpg

Alternately ... on the SpecJT screen just double-click on the 'sync line' of the station of interest, the software will automatically do all of the 4 steps above.

There is no mass decode of JT65 like in WSPR unless you use MAP65.

73,
Bob, ZL1RS in the Bay of Islands at RF64vs
http://www.qsl.net/zl1rs
User avatar
ZL1RS
Forum Diehard
 
Posts: 493
Joined: Fri Feb 08, 2008 10:29 pm
Location: Bay of Islands

Re: WSJT9.3

Postby VK7XX » Fri Sep 26, 2014 7:19 am

VK2FAK wrote:Hi all....

Just a quick question on the operation of this software....I have been running it on JT65 and notice it does not decode 2 stations operating at the same time......so how does it determine which one it will show in the decoded window ?

John



If you want to decode multiple JT65 signals, download and install WSJT-X. http://physics.princeton.edu/pulsar/K1JT/wsjtx.html I have been using version 1.3.3673 for quite some time and it is very good. Not only will it decode many many concurrent JT65 sigs, but it will also decode JT9 sigs at the same time if you want it to.

Also, you might be interested in an excellent aussie JT Add-On http://hamapps.com/

73
John
VK7XX
User avatar
VK7XX
Frequent Poster
 
Posts: 176
Joined: Sun Nov 04, 2007 10:31 am
Location: planet Earth on Tasmania Island

Re: WSJT9.3

Postby VK2FAK » Fri Sep 26, 2014 7:48 am

Hi all....

thanks for the info......the " no multiple decodes" was what I was looking for partly. the other info is a help also...yes I have the other software but not the alert...will look into that one...
Regards

John Vk2FAK
VK2FAK
Forum Diehard
 
Posts: 919
Joined: Thu Apr 15, 2010 6:28 pm


Return to WSJT

Who is online

Users browsing this forum: No registered users and 1 guest