No callsign or message data in JT65??

[VK2GG]

Hi all, very new to digital modes. I have been playing with 2 X 817's and Signalinks in WSJT7. I am seeing correct decodes, in that they have an "*" in the correct place, but no callsign or message data displayed in the decoded line. What am I doing wrong? Even in sample .wav files I see the correct ping on the display, and time, Sync, db, DT, and Df & w are all shown, but no other display!
Help! Dan VK2GG

[VK2GOM]

Hi Dan,

Where are you listening to the JT65? HF, or VHF somewhere? That may determine the variance in protocols. Operation on HF JT65 is pretty much exlusively using the JT65-HF software, so that may not decode properly in WSJT.

73 - Rob VK2GOM / G0MOH

[VK2KRR]

Hi Dan

The (*) after a transmission usually means that there hasn't been enough info decoded to give a proper decode for that line. But the information will accumulate until there is enough to build the complete callsign etc in the Average box just below the main box.

Can u post up some screen shots of what your seeing on the screen ? might make it easier to work out whats happening.